-
The ignition system of the cooker has ignition needle, pulser, battery three parts, from below to overhaul. First, Check the battery for electricity, replace a new battery, try and then press the knob to hear the "snap snap" pulse ignition sound, but you just can't see the spark, it must be the igni
-
If want to light a fire, there are three points: 1.the suitable strength of the spark,2. the suitable position of the spark in the fire cover air hole, 3.the appropriate mixed concentration of the ejected gas and air. As long as these three points are satisfied, we will certainly be able to li
-
1.To Remove: 1.SHUT OFF GAS SUPPLY and trun gas thermostat control valve to OFF position.2.Remove air shutter screw and slide air shutter to the right.3.Remove main burner screw.4.Unscrew thermocouple lead.5.Unscrew pilot gas line.6.Remove burner and pilot assembly from water heater. Pilot assemb
-
1. The function of the flameout protection deviceThe flameout protection means that when the flame is accidentally extinguished by wind, soup or the like, the flameout protection device will automatically turn off the gas source, so that the gas leakage will not be caused by the gas stove.